Synthesis and characterization of maleic acid polymer for use as scale deposits inhibitors

The problem of scale formation in oil field production facilities is encountered as a result of mixing of injection water (Lias) rich in sulfate with formation water (Ordovicien) rich in barium. 1 A large number of methods have been developed for the prevention of these deposits. In this work, poly(maleic acid) was studied to ascertain its suitability as an inhibitor of barium sulfate scale deposits. It was synthesized by a free radical solution polymerization. Two different initiators were used namely a potassium persulfate and a redox system composed of potassium persulfate/sodium‐hypophosphite monohydrate. Their concentrations were varied to obtain low‐molecular weight polymers. Physical and chemical properties of the polymers obtained were measured by infrared and UV/VIS spectrometry, solubility test, viscosimetry, refractometry, and liquid chromatography. The effectiveness of poly (maleic acid) formulations as scale inhibitor was studied by turbidimetric tests. The most effective inhibitor formulation was found to be that based on poly(maleic acid) prepared via a redox initiating system. This polymer, used at a concentration of 3 ppm, presented the highest effectiveness namely 96% and 88% at room and oil well temperature, respectively, when compared with two commercial inhibitors. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Numerical analysis of the crack growth path in the cement mantle of the reconstructed acetabulum

In this study, we use the finite element method to analyze the propagation's path of the crack in the orthopedic cement of the total hip replacement. In fact, a small python statement was incorporated with the Abaqus software to do in loop the following operations: extracting the crack propagation direction from the previous study using the maximal circumferential stresses criterion, drawing the new path, meshing and calculating again (stresses and fracture parameters). The loop is broken when the user's desired crack length is reached (number of propagations) or the value of the mode I stress intensity factor is negative. Results show that the crack propagation's path can be influenced by human body posture. The existing of a cavity in the vicinity of the crack can change its propagation path or can absolutely attract it enough to meet it. Crack can propagate in the outward direction (toward the acetabulum bone) and cannot propagate in the opposite direction, the mode I stress intensity factor increases with the crack length and that of mode II vanishes.     

Transient two-dimensional model of heat and mass transfer in a PEM fuel cell membrane

In the present work, a numerical study of heat and mass transfer within the membrane of a proton exchange membrane fuel cell is presented. The electrolyte membrane is considered an isotropic porous medium and ideal insulator for electrons and reactants. The adopted model in this study is based on the assumption of single-phase and multi-spices flow, supposed two-dimensional and unsteady. For the water transport, the major considered forces are; the convective force, resulting from the pressure gradient, the osmotic force, due to the concentration gradient and the electric force caused by the proton migration from the anode to the cathode. Based on a one-dimensional model, found in the literature, a transient two-dimensional one was proposed. The set of governing equations, written in velocity–pressure formulation, is solved by the implicit finite difference method. An alternating Direct Implicit scheme was used for the calculation. The numerical resolution gives the time- and space-dependent temperature and water concentration. The main focus lies on the influence of different cases of boundary conditions on water concentration and heat transfer variation with the intention of testing the reliability of the proposed computational fluid dynamic (CFD) code.     

Wire antenna versus modified transmission line approach to the transient analysis of grounding grid

The paper deals with transient analysis of grounding grids using two different approaches, wire antenna theory and modified transmission line model. The Pocklington integro-differential equations, in frequency domain, arising from the wire antenna theory are numerically handled via the Galerkin–Bubnov variant of indirect Boundary Element Method (GB-IBEM), while the transient response was obtained using inverse Fourier transform. The modified transmission line equations are treated using the finite difference time domain (FDTD) method. Some illustrative numerical results are presented and discussed in the paper.     

A method to improve and automate flat defect detection during ultrasonic inspection

In the nondestructive testing of materials, ultrasonic imagery can detect and characterize defects that are present in a structure. Data are displayed in the form of images, and processing algorithms can be applied for automatic detection and characterization. However, when using diffracted waves, the amplitude is often too low, and the signals are difficult to distinguish from the noise. Other times, the volume of data requires significant computation time. In this paper, we propose a method that can avoid image formation by replacing it with a sparse matrix and significantly reducing the amount of data to process; this allows for the enhancement and the automation of the detection of thin and flat defects such as cracks. The elements of the sparse matrix form a curve, which is sufficient to characterize defects in many cases. These elements are selected from diffracted signals using the split‐spectrum processing method. In this way, the signal‐to‐noise ratio is improved, and the position of the echo signal is accurately determined. When a crack is present in a material, the points of the sparse matrix form a parabola and classical tools of pattern recognition such as the Hough transform can detect it, thus providing significant help in decision‐making processes. Copyright © 2011 John Wiley & Sons, Ltd.     

Linear and non-linear analyses for semi-elliptical surface cracks in pipes under bending

In this paper, the J integral was calculated for semi-elliptical surface cracks in pipes under bending using three-dimensional finite element analysis. The computations were performed for elastic and elastic-plastic behaviours. For the elastic case, the numerical results allowed the extrapolation of shape functions for analytical determination of the J integral. The results are in a good agreement with those in the literature if the ratio between the radius and the thickness of the pipe (R/t) is from 1 to 10. The analysis was extended to values of the ratio R/t higher than 10. For the elastic-plastic, the numerical results are in good agreement with the analytical solution found in the literature for thick pipes (R/t ≥ 10). The effect of the ratio R/t becomes sensible when the ratio of the applied moment to the moment of reference (M/Mor) exceeds 0.9.     

HPLC sugar profiles of Algerian honeys

Sugar profiles of fifty honey samples from different regions of Algeria are analysed by HPLC with pulsed amperometric detection. These samples consisted of 25 multifloral and 25 unifloral honeys. Eleven sugars (two monosaccharides, nine oligosaccharides) are quantified. The mean values of fructose and glucose are in the range 35.99–42.57% and 24.63–35.06%, respectively. These monosaccharides are the main sugars of all honey samples. The sucrose, maltose, isomaltose, turanose and erlose are present nearly in all the samples, while raffinose and melezitose are detected in few samples. Furthermore, trehalose is present only in two samples and none of the samples contain melibiose. Low amounts of melezitose, raffinose and erlose are present in the range of 0.03–2.14%, 0.03–0.35% and 0.01–2.35%, respectively. PCA (Principal Component Analysis) showed that the cumulative variance was approximately 40% and Apiaceae honeys are correctly classified using FDA (Factorial Discriminant Analysis).     

Impact of Mechanical and Microstructural Properties of Potato Puree-Food Additive Complexes on Extrusion-Based 3D Printing

This paper studies the applicability of extrusion-based 3D printing for constructing novel shapes from potato puree and the effects of four additives (agar, alginate, lecithin, and glycerol) added separately at three concentrations (0.5, 1, 1.5%) on the internal strength, mechanical properties, microstructure, and color of potato puree. The printability of the potato puree and the mixtures was assayed by examining the consistency of the extrusions and the stability and accuracy of the printed patterns. The results indicate that better printing was achieved at a nozzle height of 0.5 cm and a nozzle diameter of 4 mm, with concentrations of alginate and agar between 0.5–1.5% and 0.5–1%, respectively, providing the best printability and end product stability, which was attributed to their respective high mechanical characteristics and specific mechanical energy (SME) values. Scanning electron microscopy (SEM) revealed that more convolutions were induced in the potato puree upon the addition of agar or alginate, which increased the puree stability. 3D printing did not significantly affect the surface color parameters of the final product. This study showed that the 3D printing process is a critical factor for initializing the production of customized healthy products.     

Rheological and mechanical properties of poly(lactic acid)/polystyrene polymer blend

Properties modification by blending polymers has been an area of immense interest. In this work, rheological and mechanical properties of poly(lactic acid)/polystyrene (PLA/PS) blends were investigated. PLA/PS blends in different ratios were prepared using a laboratory scale single screw extruder to obtain (3 mm) granules. Rheological properties were studied using a capillary rheometer and the Bagley’s correction was performed. True shear rate (γ _r ), true shear stress (τ _r ), and true viscosity (η _r ) were determined, the relationship between true viscosity and (1/T) was studied for PLA70 blend and the flow activation energy at a constant shear stress (E _τ ) and a constant shear rate (E _γ ) was determined. The mechanical property measurements were performed at room temperature. Stress at break and strain at break were determined. The results showed that PLA/PS blend exhibited a typical shear-thinning behavior over the range of the studied shear rates, and the viscosity of the blend decreased with increasing PLA content. Also it was found that no equal-viscosity temperature exists between PLA and PS. The mechanical results showed immiscibility between PLA and PS in the blend.